n Character set n Character set
0 U.S.A 7 Spain I
1 France 8 Japan
2 Germany 9 Norway
3 England 10 Denmark II
4 Denmark I 11 Spain II
5 Sweden 12 Latin America
6 Italy 13 Denmark/Norway
The first eight of these character sets (from U.S.A. to Spain I) can be
selected as power-up defaults by DIP switches 2-2 to 2-4.
Enable printing of a// character codes
Mode ASCII
Decimal Hexadecimal
IBM
<ESC>
“\” n,
n2
27 92 nl n2 IB 5C nl n2
Enables printing of all characters in the IBM character set, including those
assigned to character codes which are normally considered control codes.
This command remains in effect for the next nl + n2 x 256 characters,
where nl .and n,? are numbers between 0 and 2.55. During this interval
no control functions are executed. If a code with no assigned character
is received, the printer prints a space.
L
1
Enable printing of a// character codes on next character
i
/
Mode ASCII
Decimal Hexadecimal
IBM
<ESC> ‘lnrr
27 94 IB SE
/
This command operates like < ESC > “\” except that it remains in effect
for only one character.
1
Select s/ash zero
/
Mode ASCII
Decimal Hexadecimal
<ESC>
“ 93 - ‘Ll”
21 126 49
1B 7E 31
Both .
<ESC>
‘L >. - <I>
27 126 1
1B 7E 01
Causes subsequent zero characters to be overprinted with a slash.
Select normal zero
Mode ASCII
Decimal Hexadecimal
<ESC>
‘I 71 _ “0”
27 126 48
1B 7E 36
Both
<ESC>
“ 3, _ co>
27 126 0
IB 7E 00
Causes subsequent zero characters to be printed normally (0), without
a slash.
