Filter
Top Products
-
Many commands have alternative forms. Some commands use <ESC>
(character code 27) in Standard mode and cFS> (character code 28) in IBM
mode. Other commands have parameters that can be specified as either
character codes or digit characters, like the parameter 1 in the sample
command above.
FONT CONTROL COMMANDS
Select draft quality characters
.-
Mode
ASCII Decimal Hexadecimal
.- -_
4‘ ( L‘ 6, ( 4, “F’ ..).. ‘.)..
7 40 40 70 41 41 57 20 28 46 29 29 39
Both cESC> “X” “ 0 ”
27 120 48 18 76 30
-.
cEsc> “X" co>
27 120 0 1B 76 00
Changes from letter quality to draft quality. Ignored if the (STYLE)
button was pressed during power-up.
Select L Q characters
Mode
ASCII
Decimal
Hexadecimal
“ ”
Both
cESC> “X” 1
27 120 49 1B 70 31
<ESC> “X” <l>
27 120 1 1B 76 01
Changes from draft quality to letter quality. The initial font style is
Courier unless a different style has been selected by a preceding
command. Ignored if the (sTvLE)button was pressed during power-
up.
Select LQ font style
-
Mode ASCII
Decimal Hexadecimal
Both cESC> ‘k” n
27 107 n 1B 6B n
Std. <FS> “C” n
26 67 n 1C 43 n
Selects an LQ font style according to the value of n. In draft mode,
this command remains dormant and takes effect later when LQ is
selected by cESC> “x” 1. Ignored if the (WKi3 button was pressed
during power-up.