Filter
Top Products
– 16 –
5. Termal Roll Paper Specification
When consumable parts have run out, use those specified below.
(1) Roll paper specification
Thermal paper
Thickness: 65~85 µm (excluding Mitsubishi HiTec F5041)
Width: 79.5±0.5 mm (57.5±0.5 mm when the paper roller
holder is used)
Outer roll diameter: ø83 mm or less
Take up paper roll width: 80 mm or (58 mm when the
paper roller holder is used)
Core outer/inner diameter
Core outer Core inner
ø18±1 mm ø12±1 mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the roll paper or
its core.
Do not fold the tail end of the paper.
(2) Recommended paper
Mitsubishi Paper Mills Limited
P220AG (normal type paper), 65 µm (thickness)
HP220AB-1 (high image stability paper), 75 µm (thickness)
PB670 (2 color paper: Red & Black), 75 µm (thickness)
PB770 (2 color paper: Blue & Black), 75 µm (thickness)
Mitsubishi HiTec Paper Flensburg GmbH
F5041 (normal type paper), 60 µm (thickness)
Oji Paper Co., Ltd.
PD150R (normal type paper), 75 µm (thickness)
PD160R (high image stability paper), 65/75 µm (thickness)
PD750R (2 color paper: Red & Black), 75 µm (thickness)
PD700R (2 color paper: Blue & Black), 75 µm (thickness)
Nippon Paper Industries
TF50KS-E2C (normal type paper), 65 µm (thickness)
Kanzaki Specialty Papers Inc. (KSP)
P320RB (2 color paper: Red & Black), 65 µm (thickness)
P320BB (2 color paper: Blue & Black), 65 µm (thickness)
Note:
Access the following URL for the information of the recommended paper.
http://www.star-m.jp/eng/dl/dl02.htm
+0.5
-1
+0.5
-1