Star Micronics TSP200 Printer User Manual


 
– 4 –
ENGLISH
1-3. Paper Jams
1 Turn the power off and open the cover.
2 If the unit has an auto-cutter unit, move the unit in the direction of the arrow
until the lock engages. (This step is unnecessary if there is no auto-cutter unit.)
3 Cut the roll of paper just before the paper opening and remove the paper.
4 Using the same procedure outlined for cleaning the head, push the head open
lever back to release the set cover system and to place the head in the open
position.
5 Remove the paper jam. If the jam cannot be removed, turn the feed knob and
remove the paper.
6 Once the paper jam has been removed, press the top of the set cover and engage
the head open lever.
Caution
If the paper jam is in the auto-cutter, insert a Phillips screwdriver into the right
side of the auto-cutter and use it to turn the internal gears to free the paper jam.