Star Micronics TSP552II Printer User Manual


 
– 95 –
APPENDIX
A-1. General Specifications
(1)Printing method Direct line thermal printing
(2)Print speed 130 mm/s
Note: Print duty is 16.5% or less.
(3)Dot density 8 dots/mm (0.125 mm/dot)
(4)Number of print columns
48
(5)Roll paper Refer to chapter 3 for details on the recommended
paper.
Paper width: 80 mm
Roll diameter: ø83 mm or less
External diameter of core: ø18 mm
Internal diameter of core: ø12 ± 0.5 mm
(6)Cutter Partial cut (leaving the center of the paper intact)
(7)Sensor Paper end, cover open, paper near end
(8)Overall dimension 142 (W) × 215 (D) × 149 (H) (mm)
(9)Weight Approx. 2.2 kg
A-2. Print Specifications
(1)Print width 72 mm
(2)Character size 1.25W × 2.75H (mm)
(3)Column pitch 1.5 mm
(4) Character set Numeric, alphabet, kana, special, ruled line symbols,
extended graphic, international, user characters
(5)Character enlargement/reduction
double width, double height, double size
A-3. Interface
(1)Interface RS232C serial interface or Two-way parallel inter-
face (IEEE1284)
(2)Command ESC/POS
TM
commands or Star commands
Appendix A: Specifications
0
- 1.0
+0.5
0