Filter
Top Products
Instruction Manual
13
8. The “Add Net” window will allow you to congure the COM port to the settings used
by the NETRS2321E unit you wish to associate with. Select the proper operating
mode, network settings used to congure the NETRS2321E unit previously (see Web
Console Conguration).
Factory Default Setting
If you forget the setup password, or have incorrect settings making the converter
inoperable, reset the settings to factory default:
You can remove power from NETRS2321E and use any point tip to push the Reset
button (next to the RJ45 port) and hold it for 5 seconds. This will automatically turn
NETRS2321E back on, and reset the password to default.