Filter
Top Products
Instruction Manual
14
Self-Testing
Hyper Terminal for TCP/IP WinSock
After completing the wiring and parameter settings, it is advisable to conrm that all
settings are correct.
To use a single computer to test if NETRS2321E is performing properly:
1. Initiate a Hyper Terminal from the Start Menu in Windows. This can be done
by clicking on the Start button, selecting All Programs, then Accessories,
Communications and nally Hyper Terminal.
2. Provide a terminal name and click on OK.
3. At the “Connect to” screen that follows, select the TCP/IP(Winsock) option, and click
OK. Enter the NETRS2321E IP Address in the Host Address Field, and the Socket port
number set for Serial Port 1 in the Port number eld (e.g. 4660). The Socket type of
Serial Port 1 should be TCP Server: