Filter
Top Products
Instruction Manual
12
7. Highlight “Keep original data” and press Enter to select. Select Yes or No and
press Enter.
WARNING! Selecting “No” will destroy all data on the disks included in the virtual
disk set. Make sure to back up all data before continuing. The “Keep original data”
option is disabled when you choose Capacity mode, as it is inherently data-
destructive.
8. After conguring the virtual disk, highlight “Next” and press Enter. Press Y to conrm
the creation of the virtual disk. It will now be listed in the Topology Pane (left).
Administration Console Method
1. From the left pane of main screen of the Marvell Storage Utility (MSU), select the
adapter and hover the mouse over the “Operation” tab.
2. Select “Create HyperDuo”
3. Select either Safe mode or Capacity mode from the drop-down in the right pane.
Click the “Submit” button once you have selected the appropriate options for
your operation.
NOTE: If Safe mode is selected, you will have the option to select the checkbox
marked “Keep Original Data” – this option is NOT available in Capacity mode, as it is
inherently data-destructive.