Filter
Top Products
14
Scan mode, the OSD displays the name of the selected computer.
When Auto Scan detects any keyboard or mouse activity, it suspends
the scanning till activity stops; it then resumes with the next computer
in sequence. To abort the Auto Scan mode, press the left <CTRL>
twice, or, press any front button. Scan Type and Scan Rate set the
scan pattern. Scan Type (<F4>: More\Scan Type) determines if
scanned computers must also be eye mark selected. Scan Rate
(<F4>: More\Scan Rate) sets the display interval when a computer is
selected before selecting the next one.
< Manual Scan
Scan through power-on computers one by one by keyboard control.
Scan Type (<F4>: More\Scan Type) determines if scanned
computers must also be eye mark selected. Press the up arrow key
(
á) to select the previous computer and the down arrow key (â) to
select the next computer. Press any other key to abort the Manual
Scan mode.
< Audio Stick
An optional multimedia module can be LINKed to the back of each
StarView for selecting microphone and stereo speaker signals.
There are two options for Audio Stick: ON and Off. When set to 'On',
audio selection follows computer selection. When set to 'Off', audio
selection stops following computer selection. It is useful if you want
to listen to a particular computer's audio signal while operating other
computers. The non-volatile memory stores the Audio Stick setting.
< Scan Type
Ready PC +N: In Scan mode, scan through power-on and eye mark
selected computers.
Ready PC: In Scan mode, scan through power-on computers.
The non-volatile memory stores the Scan Type setting.
< Scan Rate
Sets the duration of a computer displayed in Auto Scan mode.
The options are 3 seconds, 8 seconds, 15 seconds and 30
seconds. The non-volatile memory stores the Scan Rate setting.
< Keyboard Speed