Filter
Top Products
3
Installation
Hardware Installation
1. Connect a VGA display device to the VGA connector (output) on the
front panel of the KVM switch.
2. Connect a USB keyboard and a USB mouse into the dedicated USB
keyboard and mouse ports on the KVM switch. If using audio, also
connect speakers/headphones with 3.5mm mini-jack plugs.
3. Using the included KVM cables, connect the black-colored VGA
connector into the PC1 and PC2 connectors. If using audio, also
connect the 3.5mm mini-jack plug into the respective audio connector.
4. Connect the opposite end of the KVM cable into the appropriate
connectors on the computer systems.
5. Power on the computer connected to PC1 first and wait for it to fully
boot.
6. Switch to PC2 and then power on that computer.
7. Both computers should now be functional and you should be able to
switch between them freely.
Software Installation
1. When connected to a Windows-based PC, this KVM switch will create
additional removable drives that are accessible via “My Computer”. In
the “KMDS” drive, run the setup.exe file.
2. Once the Installation Wizard starts, follow the prompts to complete
installation.
3. An icon should be visible in the System Tray (near system clock) to
access the software options.