Filter
Top Products
4
How to Use
Hotkey Switching
A Hotkey command is a short keyboard sequence for selecting a computer
connected to the KVM switch. A hotkey sequence consists of two
keystrokes (successively within 0.2 seconds). A built-in tone generator
creates a high-pitched beep for a correct hotkey command.
To switch from the currently selected computer to the next computer,
including audio:
[Scroll Lk] + [Scroll Lk]
To switch from the currently selected computer to the next computer, but
not switch the audio:
[Caps Lk] + [Caps Lk]
KMDS Software
The KMDS icon in the System Tray is used to access various additional
features by right-clicking the icon.
Switch KVM
Switch computer control, video and audio to the next computer.
Switch Audio
Switch only audio to the next computer, while control and video remain
on the current computer.
KVM PIP
Activate the Picture-In-Picture window to view a scaled-down video feed
of the next computer system. The primary purpose is for performing a
file transfer to the next computer system by dragging and dropping files
into the PIP window.