Filter
Top Products
Instruction Manual
3
Hardware Setup
Note:
a) Before you begin ensure the power switch on the USBDUP15 is set to the o
position.
b) The source or destination drives can be replaced with any SD/ SDHC/ Micro SD/
MMC/ Mini SD/ CF media card, using USB multimedia card reader (sold separately),
or Hard Drive(HDD) / Solid State Drive (SSD) through a Hard Drive docking station or
USB enclosure (sold separately).
1. Insert the source USB ash drive you would like to copy into the Source USB drive
port on the USBDUP15.
2. Insert up to 5 destination USB ash drives (that you would like to be over written
with the same data that is currently on the source drive) into the destination USB
drive ports.
WARNING! Any DATA on the destination USB Flash drives will be overwritten.
3. Connect the power adapter port on the USBDUP15 to an available power source
using the included Universal power adapter.
4. Set the power switch on the USBDUP15 to the on position.
5. The USBDUP15 is now is ready for operation as the user menu appears on the
LCD display.