Filter
Top Products
Chapter 3 Electrical Supply Installation 51
Connecting the Power Leads
The inlet power filter must be plugged into the power sockets on the motherboards
at the back of the Netra ft 1800, then the six power leads must be attached to the
input power filter.
Note – Disengage all the PSUs before you insert the power connectors. Inserting the
connectors with the PSUs engaged can damage the connectors.
FIGURE 3-4 Power Inlet Filter
Captive
spring-loaded
securing screw
(2 off)
Power inlet
sockets
Power lead
securing screws
Power lead
receptacles
Cable management loops
Top of chassis