12 Sun Blade 2500 Getting Started Guide • December 2004
Note – The Sun Blade 2500 workstation requires Solaris 8 2/04 and Solaris 9 9/04,
or a subsequent compatible version of Solaris software.
Use the following flow chart to assist with setting up your operating system.
FIGURE 2-1 Installation Process Flow Diagram
Setting Up Your Operating System
1. Power on the workstation.
See “Powering On the Workstation” on page 8.
2. Verify the version of software installed. Alternatively, you can install a newer
version of the Solaris Operating System software.
Power on the workstation.
Choose the Solaris version. Accept the li-
cense. Answer Solaris software prompts using
information specific to your site that your sys-
tem administrator provides. If necessary, refer
to “TABLE 2-1, Information for Setting Up the
Solaris Desktop Operating System”.
READY TO WORK!
START
Yes
See “Powering On the Workstation”.
For instructions, refer to the documentation in
the Solaris Media Kit for your operating
environment.
See “Setting Up Your Operating System”.
See “Getting Started With the Additional Preinstalled Soft-
ware”.
No
Install different
version from
other media.
Use a
preinstalled
version of
software?