Filter
Top Products
Installing and Configuring the ge Device Driver 5
Driver Parameter Values and Definitions
TABLE 1 describes the parameters and settings for the ge driver.
TABLE 1 ge Driver Parameters, Status, and Descriptions
Parameter Status Description
link_status Read only Defines the current status
link_speed Read only Defines the current status
link_mode Read only Defines the current status
ipg1 Read and write Interpacket gap parameter
ipg2 Read and write Interpacket gap parameter
instance Read and write Device instance
lance_mode Read and write Enable additional delay before transmitting a
packet
ipg0 Read and write Additional delay before transmitting a packet
adv_1000autoneg_cap Read and write Operational mode parameter
adv_1000fdx_cap Read and write Operational mode parameter
adv_1000hdx_cap Read and write Operational mode parameter
adv_pauseTX Read and write Operational mode parameter
adv_pauseRX Read and write Operational mode parameter
1000autoneg_cap Read only PCS autonegotiation capability
1000fdx_cap Read only PCS full duplex capability
1000hdx_cap Read only PCS half duplex capability
asm_dir_cap Read only PCS ASM_DIR capability
pause_cap Read only PCS Symmetric PAUSE capability
lp_1000autoneg_cap Read only Link partner autonegotiation capability
lp_1000fdx_cap Read only Link partner capability
lp_1000hdx_cap Read only Link partner capability
lp_asm_dir_cap Read only Link partner capability
lp_pause_cap Read only Link partner capability