Filter
Top Products
Award BIOS Setup
51
3.9 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system, which allows I/O devices to operate at
speeds nearing the speed the CPU itself uses when communicating with its
own special components. This section covers some very technical items
and it is strongly recommended that only experienced users should make
any changes to the default settings.
CMOS Setup Utility – Copyright © 1984 - 2001 Award Software
PnP/PCI Configurations
PNP OS Installed
Reset Configuration Data
Resources Controlled By
X IRQ Resources
X DMA Resources
PCI/VGA Palette Snoop
No
Disabled
Auto (ESCD)
Press Enter
Press Enter
Disabled
Item Help
_________________________
Menu Level ¾
Default is Disabled. Select
Enabled to reset Extended
System Configuration Data
(ESCD) when you exit Setup if
you have installed a new add-on
and the system reconfiguration
has caused such a serious
conflict that the OS cannot boot
↑↓←→Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
PNP OS Installed:
This item allows you to determine install PnP OS or not.
The choice: Yes, No.
Reset Configuration Data:
Normally, you leave this field Disabled. Select “Enabled” to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have
installed a new add-on and the system reconfiguration has caused such a
serious conflict that the operating system cannot boot.
The choice: Enabled, Disabled.