Filter
Top Products
Chapter 2 Hardware Installation and Removal 11
a. Remove the transceiver from its cage assembly (see FIGURE 2-2) by pulling the
bail (handle) out and down to release the latch and gently pull the
transceiver out of its housing.
Do not force it. After the latch is released, the transceiver slides out easily..
Caution – This is a delicate operation–take care not to damage the transceiver.
FIGURE 2-1 Optical Transceiver
FIGURE 2-2 A Partly Extracted Optical Transceiver and an Optical Transciever That is Latched In Place