Filter
Top Products
28 Sun StorageTek 8 Gb FC PCI-Express HBA, Emulex Installation Guide • December 2008
▼ To Install the Software For the Windows Server
2003 or Windows Server 2008 OS
1. Go to the Emulex support site for Sun Microsystems at:
http://www.emulex.com/sun/support/index.jsp
2. Locate the driver section for Windows.
3. Download the Driver Kit by clicking Download.
4. Click PDF Manual to download the installation guide for the Windows OS.
5. Install the driver and management utilities for the Windows OS as described in
the installation guide.
Configuration and Diagnostic Utilities
Use the HBAnywhere utility or the lputil command-line interface (CLI) utility to
configure the HBA. These utilities are available for Linux and Windows OSes and
provide support for the following functions:
■ Discover local and remote hosts, HBAs, targets, and LUNs
■ Reset HBAs
■ Set HBA driver parameters
■ Update firmware
■ Enable or disable the system BIOS
■ Run diagnostic tests on HBAs
■ Manage out-of-band HBAs
■ Manage local and in-band remote HBAs
For more information about the HBAnyware and lputil utilities, download their
user manuals from the Emulex support site for Sun Microsystems.