Filter
Top Products
4
USING MICRO-SD CARD
The device supports maximum 32GB micro SD card.
Insert your card into the micro SD slot until it clicks into place. Then it's ready for
visiting.
Remove microSD Card
Close all applications or documents which have been opened on the card. Tap
Settings Storage SD card Unmount this storage device. When it
displayed Mount this device, press the card lightly; it is partially ejected allowing
you to pull the card out.
Don't insert and remove the USB flash drive repeatedly in a short time, as this
may cause damage to the card.
We recommend using good quality memory cards to avoid incompatibility.
GETTING STARTED
Charge the device
It is not recommended to use the device while charging.
Plug the power adapter into an electrical outlet, and then connect to the device to
fully charge the battery before use (A full charge takes about 6 hours when the
battery's run out).
Turn the device on
Press the power button and hold for 2 seconds.
Wi-Fi Network Setup
Since many functions require a Wi-Fi connection, we recommend you to set up
your Wi-Fi network firstly.
1. Tap Settings.
2. Slide Wi-Fi switch to turn on.
The device scans automatically and lists all local Wi-Fi Network found. A lock
indicates secure Wi-Fi networks that require input of password to connect.
1. Tap the desired network which you want to connect enter the Network
Password if applicable tap Connect.
2. Tap to return to the Desktop screen.