Filter
Top Products
AOC-SASLP-MV8 Add-on Card User’s Manual
2-2
Use a single port SAS “ipass” cable (Supermicro order number CBL-0108L-02) to
connect each internal SAS port to up to four drives.
2-2 Jumpers
The AOC-SASLP-MV8 add-on card does not have any configurable jumpers.
2-3 LED Indicators
Figure 2-2 displays LED indicators on the add-on card. The Ready (RDY) LED (yellow)
turns on when a drive is present on the HBA port. An Active (ACT) LED (green) blinks to
show drive activity on that port.
Figure 2-2. LED Indicators
NOTE: These LEDs are primarily used for debug purposes only.