Filter
Top Products
SCF418 Chassis Manual
6-4
6-5 Rack Mounting Instructions
This section provides information on installing the chassis into a rack unit with the
rails provided. There are a variety of rack units on the market, which may mean
that the assembly procedure will differ slightly from the instructions provided. You
should also refer to the installation instructions that came with the rack unit you are
using. NOTE: This rail will t a rack between 28.5" and 33.5" deep. The SCF418
is not designed for installation into a Telco post-style rack unit.
Identifying the Sections of the Rack Rails
The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of two sections: A front section that secures to the front post of
the rack and a rear section that can be adjusted in length and secures to the rear
post of the rack. These assemblies are specically designed for the left and right
side of the chassis.
Adjusting the Rails
Each rail assembly has an adjusting screw. loosening this screw allows you to adjust
the length of the rail to t a variety of rack sizes.
Figure 6-1: Identifying the Outer Rail and Inner Rails
(Left Rail Assembly Shown)
Rear
Section
This Side Faces
Outward
Adjusting
Screw
Front Section