Filter
Top Products
Release: 1.0c 26 / 27
SupermicroSwitchWebGUIQuickConfigurationGuide
4.3 Associating a Port Channel with Ports
Once a port channel is created in the port channel page, it can be associated with the required
physical ports. This can be done in the Layer2 Mgmt
LA
Port Settings page.
Configure Port Channel and Mode for the required physical ports.
Use the mode “ON” for static port channels. Use the mode as “ACTIVE” or “PASSIVE” for LACP
port channels.
Fig 15: Port Channel Ports Page
For example to configure the ports gi 0/15 and gi 0/16 with static port channel 10, do the following
steps.
Check the check box for the port gi 0/15 and gi 0/16.
Choose the port channel as po10 for both port gi 0/15 and gi 0/16.
Choose the mode as “On” for both ports gi 0/15 and gi 0/16.
Click on Apply button.