Filter
Top Products
Release: 1.0c 5 / 27
SupermicroSwitchWebGUIQuickConfigurationGuide
1 Introduction
This document is designed to provide Supermicro switch users with the information required to
configure the basic functionalities on the switch through its Web graphical user interface (GUI).
Supermicro Switch products can be configured through Web browsers like Internet Explorer or
Mozilla Firefox. To manage a switch through a web browser, type in the management IP address
in the web browser address bar. This will allow you to start accessing the switch. For example, if
the management IP address of the switch is 192.168.100.102, the switch can be accessed
through the Web browser by typing http://192.168.100.102 in the address bar of the web
browser.
Note:
Most of the contents of this manual apply to these switch products:
SSE-G48-TG4
SSE-G24-TG4
SSE-X24S
SSE-X24SR
SSE-X3348S
SSE-X3348SR
SSE-X3348T
SSE-X3348TR
SBM-GEM-X2C
SBM-GEM-X2C+
SBM-GEM-X3S+
SBM-XEM-X10SM
In a few sections the contents differ for these products. In those specific places, the applicable
product is clearly identified. So if any particular product is not mentioned, you can assume that
the contents are valid for all six switch products.