Filter
Top Products
2-2
X6DHT-G User's Manual
IMPORTANT: Always connect the power cord last and always remove it
before adding, removing or changing any hardware components. Make sure
that you install the processor into the CPU socket before you install the
CPU heatsink.
2-2 Xeon EM64T Processor and Heatsink Installation
When handling the processor package, avoid placing direct
pressure on the label area of the fan. Also, do not place the
motherboard on a conductive surface, which can damage the BIOS
battery and prevent the system from booting up.
!
Socket lever
CPU Installation
1. Lift the lever on the CPU
socket: lift the lever completely
as shown on the picture on the
right; otherwise, you will dam-
age the CPU socket when power
is applied. (Install CPU1 first.)
2. Insert the CPU in the socket,
making sure that pin 1 of the
CPU aligns with pin 1 of the
socket (both corners are marked
with a triangle). When using
only one CPU, install it into CPU
socket #1 (Socket #2 is auto-
matically disabled if only one
CPU is used).
3. Press the lever down until you
hear the click, so you can be
sure that the CPU is securely in-
stalled in the CPU socket.
Pin 1
Socket lever in the
locking Position