Filter
Top Products
Chapter 4: BIOS
4-7
Boot Features
Access the submenu to make changes to the following settings.
Quick Boot Mode
If enabled, this feature will speed up the POST (Power On Self Test)
routine by skipping certain tests after the computer is turned on. The
settings are Enabled and Disabled. If Disabled, the POST routine will run
at normal speed.
Quiet Boot
This setting allows you to Enable or Disable the logo graphic during
boot-up.
ACPI Mode
Use the setting to determine if you want to employ ACPI (Advanced
Configuration and Power Interface) power management on your system.
The options are Yes and No.
Power Button Behavior
If set to Instant-Off, the system will power off immediately as soon as the
user hits the power button. If set to 4-sec., the system will power off when
the user presses the power button for 4 seconds or longer. The options are
instant-off and 4-sec override.
Resume On Modem Ring
Select On to “wake your system up” when an incoming call is received
by your modem. The options are On and Off.
Power Loss Control
This setting allows you to choose how the system will react when power
returns after an unexpected loss of power. The options are Stay Off,
Power On, and Last State.
Watch Dog
If enabled, this option will automatically reset the system if the system is
not active for more than 5 minutes. The options are Enabled and
Disabled.
Summary Screen
This setting allows you to Enable or Disable the summary screen which
displays the system configuration during bootup.