Filter
Top Products
5-16
X8DTU-6F+/X8DTU-6TF+/X8DTU-6(T)F+-LR Motherboard User’s Manual
Onboard LAN Option ROM Select
Select iSCSI to use iSCSI Option ROMs to boot the computing using a network
device. Select iSCSI to use PXE Option ROMs to boot the computing using a
network device. The options are iSCSI and PXE.
Load Onboard LAN1~LAN4 Option ROM
Select Enabled to enable the onboard LAN1, LAN2, LAN3 or LAN4 Option ROM.
This is to boot computer using a network interface. The options are Enabled and
Disabled.
Load Onboard SAS Option ROM (Available when SAS is enabled)
Select Enabled to boot the system using a SAS connection. The options are
Enabled and Disabled.
Boot Graphics Adapter Priority
This feature allows the user to specify which graphics controller to be used as the
primary boot graphics controller. The options are Onboard VGA, Slot J2 PCI-E
2.0 x16, and Offboard VGA.
Super IO Device Confi guration
Serial Port1 Address/ Serial Port2 Address
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial port
physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8
as its I/O port address and IRQ 4 for the interrupt address. The options for Serial
Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3, and 2F8/IRQ3. The options for
Serial Port2 are Disabled, 2F8/IRQ3, 3E8/IRQ4, 3F8/IRQ4, and 2E8/IRQ3.
Serial Port 2 Attribute
This feature allows the user to set COM 2 as a normal serial port or a virtual COM
port used for SOL (Serial Over LAN). The options are SOL and COM.
Remote Access Confi guration
Remote Access
Select Enabled to enable Remote Access support. The options are Disabled and
Enabled. If Remote Access is set to Enabled, the following items will display: