Symbol Technologies LS2100 Scanner User Manual


 
2-1
Chapter 2
Scanning with the LS 2100
Introduction
This chapter covers the proper techniques for scanning bar codes and the decode zone for the
LS 2100 scanner.
Scanning with the LS 2100
1. Before you use the scanner, make sure all cable connections are secure.
2. Make sure the bar code is in the correct scanning range. Aim and press the trigger;
the scan beam lights and an orange light illuminates at the rear of the scanner. The
scanner has read the symbol when:
"
You hear a beep.
"
The orange light turns green.
"
The laser turns off.