Filter
Top Products
Assigning Access Right for Domain Users
After adding Synology Server to a Windows domain, you can grant domain
users’ access rights to the shared folders on Synology server. Please refer to the
“
Accessing Synology Server Data > Setting Access Control” section for details.
Resetting Administrator Password
Pressing the “RESET” button and hold it for about 4 seconds before you heard a
beep sound will restore IP, DNS, passwords for the "admin" account to default
value, and reset the “guest” account to the “enabled” status.
Reinstalling Synology Server
If for any reason you have to reinstall the Synology Server, you can press the
RESET button on the back panel twice, and the Synology Server will be
reinstalled. The data saved on the Synology Server will not be erased during the
reinstallation. However, for security’s reason, we strongly recommend that you
back up the data on the server.
To reinstall the server:
1. Press the “RESET” button and hold it for about 4 seconds. Release the
button when the Synology Server emits a beep sound.
2. Within the next 10 seconds, press the “RESET” button and hold it for about 4
seconds again. Release the button when the Synology Server emits three
beep sounds.
3. Run Synology Assistant, and set up the Synology Server again.
16