Filter
Top Products
Managing Power 3-5
Using the Primary Battery Pack
CAUTION:
There is danger of explosion if the battery is incorrectly replaced. Replace the
battery only with the computer manufacturer’s optional battery packs. Discard used
batteries according to the dealer’s instructions.
Do not attempt to disassemble the battery pack.
To install the primary battery pack, follow these steps:
1. Locate the primary battery slot on the right side of the system.
2. Open the slot cover by pressing on both sides of the release latch
using your thumb and index fingers.
3. Slide the primary battery pack all the way into the slot. Make sure to
observe the correct orientation (the ribbon strip must face outward for
future battery back removal).
4. Close the slot cover to secure the primary battery pack.
Primary battery slot