Filter
Top Products
3-6 Managing Power
Using the Secondary Battery Pack
If you often rely on battery power for a long period of time while
traveling, you may consider the purchase of an additional battery pack
from your dealer and keep it with you in a fully charged state as a backup.
To install the secondary battery pack, follow these steps:
1. Locate the optical drive slot on the left side of the system.
2. Open the slot cover by pressing on both sides of the release latch
using your thumb and index fingers.
3. Gently place the computer upside down.
4. Lift up the handle of the optical drive release knob and turn it
counter-clockwise. The CD/Combo/DVD RW drive will slide out
partially. Gently pull on it to remove it.
5. Slide the secondary battery pack all the way into the slot. Make sure
to observe the correct orientation (the ribbon strip must face outward
for future battery pack removal).
6. Close the slot cover to secure the secondary battery
Lift up and turn counter-clockwise