Filter
Top Products
Operations Manual
SV-2000-X2 Server (CENTRIX / JHSV)
Part Number: 1008080 Page 56 of 82
Version 1.4. 01/12/2010
6.11.1 146GB SAS Hard Drive
Figure 6-22 146GB SAS HDD (Removed from HD Carrier)
6.12 Removing the Server Cover
The location of the mounting screws securing
the Server cover varies per Server model. To
remove the cover, use a Phillips screwdriver to
remove all screws from the sides and top of the
cover.
NOTE: It is important to make note of the
location from which screws are removed
since different screw lengths may be used
to secure the cover.
CAUTION
It is not safe to operate TAG Servers
without the cover in place. Failure to take
this precaution may result in personal
injury and system damage.
6.13 Adding or Replacing System Memory
This section lists the procedures for adding or
replacing system memory.