Tally Genicom T2150 Printer User Manual


 
Changing the
ribbon cassette
Remove all the paper from the printer and make sure that the printer is switched off before
opening the cover.
Press the two slide latches, raise the top cover to an angle of
90 degrees relative to the top cover of the printer and remove it.
Cautiously slide the print head carriage to the left stop (viewed
from the printer front).
Raise the printer bar cover and remove the used cassette.
90°
The print head becomes hot during printing. You
should therefore let it cool down for some time before
touching it.
We recommend use of genuine ribbon cassettes only.
STOP
Quick Start-up Changing the ribbon cassette
11