Filter
Top Products
TANDBERG Videoconferencing System
15
Installation
Connecting cables
All cables needed in standard configuration are connected to
the codec. Connect these cables to the other parts of the
system:
1. Power cable
Connect the system power cable and monitor power cable to
an electrical distribution socket.
2. Monitor cables
Connect the S-video cable to the input on your monitor (see
drawing). For Scart-monitors, use the Scart-adapter.
3. Microphone cable
Connect the microphone cable to the microphone.
4. Camera cable
Connect the camera cable from the S-Video output on the
camera to the S-Video input ‘Main Cam’ on the codec.
Connect also the control cable between the RJ-45 on the
camera, and the Dataport 1 on the codec.
SOME SOFTWARE VERSIONS DO NOT SUPPORT 3 ISDN LINES
NOTE
1
6
5
2
3
4