Filter
Top Products
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010
5
Safety Instructions
For your protection please read these safety instructions completely before
you connect the equipment to the power source. Carefully observe all warnings,
precautions and instructions both on the apparatus and in these operating
instructions. Keep this manual for future reference.
Water and Moisture
Do not operate the apparatus under or near water—for example near a bathtub,
kitchen sink, or laundry tub, in a wet basement, near a swimming pool or in other areas
with high humidity.
Never install jacks for communication cables in wet locations unless the jack is
specifically designed for wet locations.
Do not touch the product with wet hands.
Cleaning
Unplug the apparatus from communication lines, line power-outlet or any power
source before cleaning or polishing. Do not use liquid cleaners or aerosol cleaners.
Use a lint-free cloth lightly moistened with water for cleaning the exterior of the
apparatus.
Ventilation
Do not block any of the ventilation openings of the apparatus. Never cover the slots
and openings with a cloth or other material. Never install the apparatus near heat
sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not place the product in direct sunlight or close to a surface directly heated by the sun.
Lightning
Never use this apparatus, or connect/disconnect communication cables or power
cables during lightning storms.
Dust
Do not operate the apparatus in areas with high concentration of dust.
Vibration
Do not operate the apparatus in areas with vibration or place it on an unstable surface.
Power Connection and Hazardous Voltage
• The product may have hazardous voltage inside.
• Never attempt to open this product, or any peripherals connected to the product,
where this action requires a tool.
• This product should always be powered from an earthed power outlet.
• Never connect attached power supply cord to other products.
• In case any parts of the product has visual damage never attempt to connect main
power, or any other power source, before consulting service personnel
• The plug connecting the power cord to the product/power supply serves as the
main disconnect device for this equipment. The power cord must always be easily
accessible.
• Route the power cord so as to avoid it being walked on or pinched by items
placed upon or against it. Pay particular attention to the plugs, receptacles and the
point where the cord exits from the apparatus.
• Do not tug the power cord.
• If the provided plug does not fit into your outlet, consult an electrician.
• Never install cables, or any peripherals, without first unplugging the device from its
power source.
Servicing
Do not attempt to service the apparatus yourself as opening or removing covers may
expose you to dangerous voltages or other hazards, and will void the warranty. Refer
all servicing to qualified service personnel.
Unplug the apparatus from its power source and refer servicing to qualified personnel
under the following conditions:
• If the power cord or plug is damaged or frayed.
• If liquid has been spilled into the apparatus.
• If objects have fallen into the apparatus.
• If the apparatus has been exposed to rain or moisture
• If the apparatus has been subjected to excessive shock by being dropped.
• If the cabinet has been damaged.
• If the apparatus seems to be overheated.
• If the apparatus emits smoke or abnormal odor.
• If the apparatus fails to operate in accordance with the operating instructions.
What’s in this Guide?
Introduction
Connecting EX90
Using EX90
The Settings
Web interface