Filter
Top Products
TANDBERG 3G Gateway User Manual
2.1 Unpacking
To avoid damage to the unit during transportation, the 3G Gateway is delivered in a special
shipping box, which should contain the following components:
User Manual and other documentation on CD.
Rack-ears, screws and screwdriver.
Cables:
o Power cable
o One to four ISDN PRI cables, depending on the number PRI Option keys, or 4
ISDN BRI cables depending on the version.
o Ethernet cable
o RS232 cable
TANDBERG 3G Gateway
Installation site preparations
Make sure that the 3G Gateway is accessible and that all cables can be easily
connected.
For ventilation: Leave a space of at least 10cm (4 inches) behind the 3G Gateway’s rear
panel and 10cm (4 inches) in front of the front panel.
The room in which you install the 3G Gateway should have an ambient temperature
between 0
º
C and 35
º
C (32
º
F and 95
º
F) and between 10% and 90% non-condensing
relative humidity.
Do not place heavy objects directly on top of the 3G Gateway.
Do not place hot objects directly on top, or directly beneath the 3G Gateway.
Use a grounded AC power outlet for the 3G Gateway.
You will need a CSU (Channel Service Unit) between your system and the PRI line from
your network provider.
Make sure that it is possible to receive and to make Mobile(h324M) video calls from
behind this line. Check this with your network operator!
If you are behind a PABX make sure that the PBABX is capable of routing Mobile
(H324M) video calls.
13