Filter
Top Products
3232
3232
32
Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issue with some power supplies. Please set this item to
[Disable] if above issue occurs.
kernel version 2.4.18 or higher. This option will be hidden if the installed
CPU does not support Hyper-Threading technology.
Intel (R) SpeedStep(tm) tech.
Intel (R) SpeedStep(tm) tech. is Intel’s new power saving technology.
Processor can switch between multiple frequency and voltage points to
enable power savings. The default value is [Auto]. Configuration options:
[Auto], [Enabled] and [Disabled]. If you install Windows
®
XP and select
[Auto], you need to set the “Power Schemes” as “Portable/Laptop” to en-
able this function. If you install Windows
®
Vista
TM
and want to enable this
function, please set this item to [Enabled]. This item will be hidden if the
current CPU does not support Intel (R) SpeedStep(tm) tech..
3.3.23.3.2
3.3.23.3.2
3.3.2
Chipset ConfigurationChipset Configuration
Chipset ConfigurationChipset Configuration
Chipset Configuration
BIOS SETUP UTILITY
v02.54(C)Copyright 1985-2005, American Megatrends, Inc.
Chipset Configuration
DRAM Frequency
Flexibility Option
Configure DRAM Timing by SPD
DRAM CAS# Latency
[Disabled]
[Enabled]
[Auto]
[Auto]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
F9 Load Defaults
Options
200MHz (DDRII400)
Auto
266MHz (DDRII533)
333MHz (DDRII667)
Advanced
[PCI]
[Auto]
[DVMT Mode]
[Maximum DVMT]
Primary Graphics Adapter
InternalGraphics Mode Select
DVMT Mode Select
DVMT/FIXED Memory
[Auto]
[Enabled]
[Enabled]
[Enabled]
OnBoard HD Audio
Front Panel
CD-In
OnBoard Lan
[Enabled]
PCI Fix Function
[Auto]
VCCM Voltage
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [200MHz (DDRII 400)], [266MHz
(DDRII 533)], [333MHz (DDRII 667)]. The configuration options may change
according to the corresponding FSB frequency of the CPU you adopt.
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
Configure DRAM Timing by SPD
Select [Enabled] will configure the following items by the contents in the
SPD (Serial Presence Detect) device. If you select [Disabled], you will find