Filter
Top Products
13
Mounting
The MS-2002 mounts in a standard 19-inch equipment rack and is 1 RU (Rack Unit) high. When mounting the MS-2002,
install the supplied black face plates on the appropriate side. The face plates should be mounted with the grooves on the top.
NOTE: You must perform the sidetone adjustment (page 10) after all components are connected. With the MS-2002
being rack mounted, you may not be able to access the sidetone trimmers. In this case, you can position the
MS-2002 in the rack and make all required connections. Then, adjust the sidetone trimmers before installing and
tightening all rack mount screws.
Connections
Sample connection drawings are shown in figures 3 to 6.
External Program Input and PA Output
Connection for external program input and PA output are shown in Figure 6 on page 18.
REFERENCE: For more information, see the EMS-4001 User Instruction Manual (P/N 9350-7713-000) which can be
found at http://www.telexaudiocom.com/manuals.php.