Texas Instruments TMS370 Network Card User Manual


 
3-1
Chapter 3
Operating in the Display Window
This chapter describes the commands offered in the display window of the
programmer’s display.
The first part of this chapter explains how the command menus and function
keys work; it also has a short section on entering information at the cursor
prompt.
These sections are the same as the initial sections in Chapter 2; if you
have already read these sections in Chapter 2, there is no need to read them
in this chapter.
The remainder of this chapter describes the operation of the display window
and explains each display command, walking you through the interactive dis-
play prompts where applicable.
Section Page
3.1 How the Command Menus Work 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 Using the Special Function Keys 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3 What Happens If I Make an Error? 3-3. . . . . . . . . . . . . . . . . . . . . . . . . .
3.4 Understanding Your Input at the Cursor Prompt 3-4. . . . . . . . . . . . . . .
3.5 Display Window 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6 Filling a Block of PC Memory With a Value 3-8. . . . . . . . . . . . . . . . . . .
3.7 Loading a COFF File Into PC Memory 3-9. . . . . . . . . . . . . . . . . . . . . . .
3.8 Outputting a COFF File From PC Memory 3-10. . . . . . . . . . . . . . . . . .
3.9 Moving Blocks of PC Memory 3-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.10 Programming a Device From PC Memory 3-13. . . . . . . . . . . . . . . . . . .
3.11 Showing and Operating Within Text File 3-17. . . . . . . . . . . . . . . . . . . .
3.12 Uploading a Device’s Contents Into PC Memory 3-19. . . . . . . . . . . . .
3.13 Verifying the Contents of a Device 3-22. . . . . . . . . . . . . . . . . . . . . . . . .
3.14 Editing the Contents of PC Memory 3-26. . . . . . . . . . . . . . . . . . . . . . . .
3.15 Using the Master Mode Menu 3-27. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.16 Suspending the Program and Entering DOS 3-28. . . . . . . . . . . . . . . .
3.17 Quiting the Program and Exiting to DOS 3-28. . . . . . . . . . . . . . . . . . . .