Filter
Top Products
Related Documentation From Texas Instruments
v
Preface
Read This First
About This Manual
This user’s guide describes the setup and operation of the TUSB3410 general-
purpose input/output evaluation board. Familiarity with the universal serial bus
(USB) protocol and common lab testing equipment is required, and is as-
sumed throughout this user’s guide.
How to Use This Manual
This document contains the following chapters:
- Chapter 1—Required Hardware and Software
- Chapter 2—EVM Operation
- Chapter 3—Bill of Materials and EVM Layouts
- Appendix A—TUSB3410 GPIO EVM Schematic Diagram
Related Documentation From Texas Instruments
TUSB3410 USB to Serial Port Controller data manual Literature No. SLLS519
FCC Warning
This equipment is intended for use in a laboratory test environment only. It gen-
erates, uses, and can radiate radio frequency energy and has not been tested
for compliance with the limits of computing devices pursuant to subpart J of
part 15 of FCC rules, which are designed to provide reasonable protection
against radio frequency interference. Operation of this equipment in other en-
vironments may cause interference with radio communications, in which case
the user at his own expense will be required to take whatever measures may
be required to correct this interference.