Filter
Top Products
Via Text Management
• From the Telnet Main Menu, select “Management setup”
• Select “Enable/Disable Telnet.” If Telnet is currently
enabled, your option will be “Disable Telnet” and visa versa.
• Press the “” key or [ENTER] to toggle between the sections
• Select “Save changes and exit” to save the changes.
The menu displays the current Telnet status above the menu
options, as shown in Figure 4-4: Telnet Setup. Users currently
connected through Telnet remain connected until their session
ends.
Figure 4-4: Telnet Setup
RamSan-300/320/325 User’s Manual - 24 -