Filter
Top Products
1 SpeedTouch™ Installation
3EC 37891 AAAA TCZZA Ed. 01
21
SpeedTouch™
embedded dial-in
application
You can establish dial-in connections, pre-configured by the SpeedTouch™ Setup wizard
or by uploading the appropriate configuration file.
The SpeedTouch™ supports both two most popular connection methods: Routed PPP
over ATM (PPPoA) and PPP over Ethernet (PPPoE).
The connection method to use depends on the preferences of your ISP, hence the
configuration profile you must apply to the SpeedTouch™
Note: The following description provides only an example of how you can establish
Internet connectivity by starting Routed PPP connections. The SpeedTouch™ supports
various other methods for Internet access. The actual implementation depends on the
preferences of your Service Provider.
Starting a PPP session To open a Routed PPP connection ot the Internet:
Step Action
1 Open a web browser on your PC/computer and browse to the SpeedTouch™
web pages:
2 If needed, expand the Basic Topics, and click Connect to open the Connec-
tions web page.
3 In the Connections table all configured Routed PPP entries are shown.
In the Interface column select the entry you want to start a session with. As a
result the entry will be highlighted.
4 If not provided yet, enter your user name and password in the appropriate
fields. If you want the SpeedTouch™ to remember your credentials, select
'Save this password'.
5 Click Connect.
While the SpeedTouch™ tries to start the session 'trying' appears in the State
column of the entry. Once the session is started successfully the field displays
'up'. From then on you are online and you can start your application or
browse the Internet.