Filter
Top Products
3 SpeedTouch™ System Software Upgrade
3EC 37891 AAAA TCZZA Ed. 01
33
3 SpeedTouch™ System Software Upgrade
Introduction Due to the continuous evolution of DSL technology, SpeedTouch™ products are regu-
larly upgraded.
This chapter describes how to upgrade the SpeedTouch™ system software.
System software
updates
You can check for system software upgrades regularly at the SpeedTouch™ web site at:
• http://www.speedtouch.com
Firmware upgrades may also be available from your Service Provider. Please contact
your Service Provider for more information.
Imperative requirement The SpeedTouch™ system software upgrade procedures, described in this chapter are
valid for both SpeedTouch™510 and SpeedTouch™530.
However, these procedures are only possible via the SpeedTouch™ Ethernet connec-
tion(s).
I.e. to upgrade a SpeedTouch™530, connected via the USB port, disconnect the USB
port and make a connection from the PC to the SpeedTouch™530 Ethernet port as
described in subsection “1.2.1. Local Ethernet Connection Setup” on page 10, prior to
follow the procedures described below.
Upgrade mechanisms Depending on your Operating System and specific requirements, following options are
available to upgrade the SpeedTouch™ system software:
• In case you run an MS Windows Operating System or Mac OS10:
For your convenience a SpeedTouch™ Upgrade wizard will guide you through the
system software upgrade procedure.
See section “3.1 The SpeedTouch™ Upgrade Wizard” on page 34 for more infor-
mation.
• In case you run another Operating System, e.g. linux, or for extra information
about advanced system software management:
See “3.2 Manual System Software Management via BOOTP Server” on page 39 for
more information.