Filter
Top Products
1 SpeedTouch™570 Installation
3EC 17766 BAAA TCZZA Ed. 01
21
6 The setup wizard should find your SpeedTouch™570 device on the local
network. This is indicated by following window:
If the Setup wizard does not find an SpeedTouch™570 on the network an
error window pops up. In this case check:
• Whether your PC is correctly wired to the SpeedTouch™570 or the
WLAN client is correctly registered to the SpeedTouch™570 WLAN as
described in “1.3.1. First-time Wireless Client Connectivity” on page 15.
• That no dedicated firewall device or router is placed between your PC
and the SpeedTouch™570 and that no personal firewall software is
running on your PC
• Whether the SpeedTouch™570 is powered on and fully initialized.
Note In case of MS Windows 95 or Windows NT4.0 it is advised to
configure the PC with a static IP address, e.g. 10.0.0.1. Make sure
however not to use the IP address 10.0.0.138 as it is the Speed-
Touch™570 's default IP address.
To repeat the search for the SpeedTouch™570, click Back and proceed with
step 5 of this procedure.
7 To continue with the configuration of the SpeedTouch™570 and your PC,
proceed with the configuration procedure described below
Step Action