Filter
Top Products
E-DOC-CTC-20080118-0003 v1.0
45
6 Internet Security
6.2 Web site Filtering
Introduction
Web site filtering allows you to restrict access to specific web sites.
Strategies
There are two strategies you can follow:
Allow access to all web sites and manually specify a number of web sites that may be accessed.
- or -
Deny access to all web site and manually specify which web sites may not be accessed.
Procedure
Proceed as follows:
1 Enable Web site filtering and specify a default action.
2 Configure the exceptions.
Enable Web site filtering and specify a default action
Proceed as follows:
1 Browse to the Thomson Gateway Web Interface.
2 On the Toolbox menu, click Web Site Filtering.
3 On the Navigation Bar, click Configure.
4 Select the Use Address Based Filter check box.
5 In the Action for Unknown Sites, select the action you want to use by default.
6 Click Apply.
Configure the exceptions
You can now:
Denying access to a specific Web site
Allowing access to a specific Web site
Redirecting a Web site
Redirecting all Web sites