Filter
Top Products
dhcp Commands
E-DOC-CTC-20071119-0014 v1.0
167
dhcp server pool config
Configure a DHCP server pool
SYNTAX:
dhcp server pool config name = <{LAN_private}>
[state = <{disabled|enabled}]>
[intf = <{Internet|LocalNetwork}]>
[index = <number]>
[poolstart = <ip-address]>
[poolend = <ip-address]>
[netmask = <ip-mask(dotted or cidr)]>
[gateway = <ip-address|0|none]>
[server = <ip-address|none]>
[primdns = <ip-address|none]>
[secdns = <ip-address|none]>
[dnsmetric = <number{0-100}]>
[primwins = <ip-address|none]>
[secwins = <ip-address|none]>
[leasetime = <number{0-1814400}]>
[renewtime = <number{0-1814400}]>
[rebindtime = <number{0-1814400}]>
[unnumbered = <{disabled|enabled}]>
[localgw = <{disabled|enabled}]>
where:
name The name of the DHCP server pool. REQUIRED
state Enable/Disable the DHCP server pool admin
state.
OPTIONAL
intf The interface for which the pool is allowed to
lease IP addresses.
OPTIONAL
index The number of the pool before which you want
the new pool to be added.
OPTIONAL
poolstart The DHCP server pool start IP address. OPTIONAL
poolend The DHCP server pool end IP address. OPTIONAL
netmask The DHCP server pool netmask. OPTIONAL
gateway The IP address of the default router for DHCP
clients.
OPTIONAL
server The IP address of the DHCP server for DHCP
clients.
OPTIONAL
primdns The IP address of the primary DNS server for
DHCP clients.
OPTIONAL