Filter
Top Products
igmp Commands
E-DOC-CTC-20071119-0014 v1.0
405
igmp proxy config
Configure the IGMP proxy.
SYNTAX:
igmp proxy config [state = <{disabled|enabled}]>
[qi = <number{1-86400}]>
[qri = <number{1-86400}]>
[lmqi = <number{1-86400}]>
[rv = <number{2-10}]>
[advinter = <number{4-180}]>
[initadvinter = <number{1-4}]>
[initadvcount = <number{1-10}]>
[requirera = <{disabled|enabled}]>
[localgroup = <{disabled|enabled}]>
where:
state Enable/Disable the IGMP proxy. OPTIONAL
qi The interval in seconds between general queries
sent by the querier.
OPTIONAL
qri The maximum response time in seconds for an
IGMP client in reply to general queries.
OPTIONAL
lmqi The maximum response time in seconds for an
IGMP client in reply to group specific queries.
OPTIONAL
rv The robustness variable allows tuning for
expected IGMP packet loss.
OPTIONAL
advinter The interval in seconds for unsolicited MRD
advertisements (see rfc4286).
OPTIONAL
initadvinter The interval in seconds for initial unsolicited
MRD advertisements (see rfc4286).
OPTIONAL
initadvcount The maximum number of initial unsolicited MRD
advertisements (see rfc4286).
OPTIONAL
requirera Enable/Disable the router alert IP option check. OPTIONAL
localgroup Enable/Disable the processing of a local
multicast group in an IGMP packet.
OPTIONAL