Filter
Top Products
En
g
lish
3
Step 2 : Configuration
Static IP:
• Select "Static"
• Enter the ATA 1110's IP address in the "IP address" field.
• Set the "Net mask", default 255.255.255.0
• Enter the ATA 1110's gateway IP address (this will be your
router's IP address) in the "Gateway" field
• Enter the DNS information in the "Primary DNS" and "Alter
DNS" fields.
DHCP (default setting) : In case you are connected to a
Cable/ADSL router
• Select DHCP
If you have a DHCP server in your network (for example your
Cable/ADSL router), the ATA 1110 will automatically obtain
the network information from your DHCP server.
PPPoE : In case you are connected to an Ethernet ADSL
modem.
• Select PPPoE
• Type your PPPoE dialup information in the PPPoE setting
fields: PPPoE server (optional), Username and password.
The ATA 1110 will connect to the internet through PPPoE and
will automatically obtain the IP address , Netmask, Gateway,
Primary DNS and Alter DNS information.
The ATA 1110 can also be configured via the WAN IP
address. You can hear the WAN IP address in the ATA
1110 from your handset:
• pick up the handset;
• enter #*111#;
Then your handset will prompt ATA 1110 IP address.