Filter
Top Products
4
Step 2 : Configuration
2.3 SIP Configuration
Enter the VoIP - SIP Config setting page to setup the sip
information:
• Register Server Addr:enter the SIP provider server address
• Register Server Port:enter the SIP server register port
(typical 5060)
• Register Username:enter the username of your SIP account
• Register Password:enter the password of your SIP account
• Phone Number: enter phone number of your SIP account.
(if there is no phone number available, just
enter the username).
•Check Enable Register
•Check Enable Pub Outbound Proxy
Click Apply to confirm the settings.
Go to the Config Manage - Save Config page and
click "save" to save the configuration, otherwise you
will lose the setting after the ATA reboots.