Filter
Top Products
Getting started
Remove your Television carefully
from the box. You may wish to
Please Note
When not in use disconnect the plug
from the mains power supply.
Switching the TV on for the first time
To install your TV, please read the sections
“TV controls” and “ Tuning the television”.
Press the Standby
button to switch
the TV to standby. The standby
indicator will brighter.
Please Note
Do not leave the television on standby
unattended or overnight.
Battery fitting
Insert the 2 AAA Batteries supplied into
the compartment on the rear of the remote
control, ensure you follow the polarity
diagram inside the compartment.
4. Press the Power button on
the front of the TV. The
standby indicator will
illuminate.
store the packaging for future use.
In the box
Inside the cartoon box you should have:
Please note
If you live in a poor reception area or use an
indoor aerial you may experience loss or
corruption of teletext transmissions.
Switching on and First Use
5. Press a Numeric button or the
Program up or Program down
button on the remote handset or
Program up, Program down
or MENU button on the front panel to
switch the TV on.
The standby indicator remains on.
The picture will appear after a
few seconds.
4
Read these instructions before use.
Aerial connection
To connect an aerial, plug the aerial lead
into the aerial socket on the rear of the
TV.
7
1. Connect the power cord to the mains plug.
2. Connect the input socket of the adapter to the
12 V DC socket at the back panel of the LCD TV.
3. Connect adapter to the mains plug.
Note 1: Your TV will move to stand-by mode
in five minutes when there is no broadcast signal.
Note 2: Your TV is equipned to operate with front
panel buttons, “MENU”, “PR+”, “PR-”, “+”, “-”
in case your R/C is broken or you run out of
batteries.
However, if you use an indoor aerial the
quality of the reception may be reduced
and adjustment of the aerial may be
required when changing programs.
You can use an outdoor or indoor aerial.
• Accessories box
• Power cord
• Adapter
• Remote control
• Batteries