Filter
Top Products
2
Basic Copying Operation
23
Density adjustment
To lighten the density, press , to darken it, press
.
You can manually adjust the density by
pressing either or .
The automatic density adjustment is set by default.
Press [AUTO] to adjust the density
automatically.
Bypass copying
1
Move the paper holding lever
toward the outside and then
2
place
paper face down on the bypass tray.
1111
Press [PAPER TYPE] if the type of the paper you
placed on the bypass tray is other than plain paper.
1
Press the button corresponding to
the size of paper set on the bypass tray
and then
2
[OK].
33
Press the [START] button. Bypass
copying starts.
44
2
1
2
1
Align the side guides to the paper
length and then move the paper
holding lever toward the equipment.
22